Heavy Duty Automotive GL-5 Gear Oil

Dongsen Heavy duty automotive GL-5 gear oil is designed for the lubrication of hypoid gear sets in passenger vehicles and commercial vehicles, where they offer excellent extreme pressure (EP) and anti-wear properties.which is available in a wide viscosity range such as SAE 80W90,75W90,80W140, SAE90,SAE140.

◎Excellent lubrication and oxidation stability protect against the formation of deposits and sludge, prolong oil service life and extend oil drain intervals.

◎GL-5 compliant dongsen heavy-duty lubricants are formulated with premium base oils and state-of-the-art additive technologies to offer extended protection under the most demanding operating conditions.

◎Good anti foaming properties ensure a good oil film is maintained during service, and avoid oil overflow and leakage

◎Good oil film thickness protects against gear wear, scoring and pitting, and also prevents corrosion or spalling of gear surfaces.

◎Good resistance against rust and corrosion extends component life

Dongsen heavy Duty Automotive GL-5 Gear Oil have a wide range of applications across a wide variety of Lubrication of hyperbolic gears and other heavy-duty gears of various automobile rear axles.

◎Drive axles (front or rear) of heavy duty vehicles

◎Some transmission gears, especially hypoid gears, in heavy duty vehicles.

◎Axles and transmission systems that require a GL-5 quality oiL

1.According to equipment oil regulations, select products with appropriate quality and viscosity levels
2.During storage and transportation, it must be waterproof and moisture-proof to prevent mechanical impurities from mixing in
3.Keep the mailbox clean when in use, and clean the mailbox and oil circuit when changing the oil to prevent contamination
4.Do not mix products of different quality levels
5.The replaced old oil is treated centrally to avoid environmental pollution

1.20L/25L in plastic plastic pail/metal pail and other;
2.200L in metal /plastic drum ;
3.1000L  in IBC Tank;
4.All the weight can be packaged according to customer requirements;